The short version
Every radiology exam leaves a trail in SATU SEHAT: what was requested, the images, and the findings. Most of it can run automatically when your hospital's PACS and RIS are connected properly.
The five steps
- Step 1, the imaging order: the order is recorded in SATU SEHAT with the Accession Number as its identifier.
- Step 2, the images: the imaging device sends images to the archive, which forwards them to the SATU SEHAT DICOM Router.
- Step 3, the study record: the DICOM Router matches the images to their order, then records them in SATU SEHAT.
- Step 4, the findings: once the report is final, the radiologist's findings are sent.
- Step 5, the conclusion: the conclusion is sent together with the report PDF.
What a hospital needs to prepare
- Patients linked to SATU SEHAT data by national ID (NIK).
- Radiologists linked to their practitioner record.
- Rooms or devices registered as locations.
- Exam codes using the radiology standard from the Ministry of Health.
- Registration of the health facility with the Ministry of Health for production use.
Where Lumen PACS helps
Lumen PACS prepares nearly all of the above from the same screens used every day, then sends orders, findings, and conclusions automatically. Integration available.
Common questions
What are the stages for sending radiology data to SATU SEHAT?
There are five stages: the exam request, the images, the study record, the report findings, and the conclusion.
